Atmel AVR AT90CAN32 User Manual

257
7679H–CAN–08/08
AT90CAN32/64/128
19.10.6 CAN Enable Interrupt MOb Registers -
CANIE2 and CANIE1
• Bits 14:0 - IEMOB14:0: Interrupt Enable by MOb
– 0 - interrupt disabled.
– 1 - MOb interrupt enabled
Note: Example: CANIE2 = 0000 1100
b
: enable of interrupts on MOb 2 & 3.
• Bit 15 – Reserved Bit
This bit is reserved for future use. For compatibility with future devices, it must be written to zero
when CANIE1 is written.
19.10.7 CAN Status Interrupt MOb Registers - CANSIT2 and CANSIT1
• Bits 14:0 - SIT14:0: Status of Interrupt by MOb
– 0 - no interrupt.
– 1- MOb interrupt.
Note: Example: CANSIT2 = 0010 0001
b
: MOb 0 & 5 interrupts.
• Bit 15 – Reserved Bit
This bit is reserved for future use.
19.10.8 CAN Bit Timing Register 1 - CANBT1
• Bit 7– Reserved Bit
This bit is reserved for future use. For compatibility with future devices, it must be written to zero
when CANBT1 is written.
• Bit 6:1 – BRP5:0: Baud Rate Prescaler
Bit 76543210
IEMOB7 IEMOB6 IEMOB5 IEMOB4 IEMOB3 IEMOB2 IEMOB1 IEMOB0 CANIE2
- IEMOB14 IEMOB13 IEMOB12 IEMOB11 IEMOB10 IEMOB9 IEMOB8 CANIE1
Bit 151413121110 9 8
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Initial Value00000000
Read/Write - R/W R/W R/W R/W R/W R/W R/W
Initial Value-0000000
Bit 76543210
SIT7 SIT6 SIT5 SIT4 SIT3 SIT2 SIT1 SIT0 CANSIT2
- SIT14 SIT13 SIT12 SIT11 SIT10 SIT9 SIT8 CANSIT1
Bit 151413121110 9 8
Read/Write R R R R R R R R
Initial Value00000000
Read/Write - R R R R R R R
Initial Value-0000000
Bit 76543210
- BRP5 BRP4 BRP3 BRP2 BRP1 BRP0 - CANBT1
Read/Write - R/W R/W R/W R/W R/W R/W -
Initial Value-000000-

Atmel AVR AT90CAN32 Specifications

General

Brand	Atmel
Model	AVR AT90CAN32
Category	Microcontrollers
Language	English