32
Operation
4.11.1 Mounting the device support on the standard rail and
mounting the device
1. Place the device support onto the standard rail from above at a diagonal angle, and
use the mounting handle to fasten it in place on the rail.
2. Check that the device support is seated securely.
3. Use the device base and the recesses to position the device on the device support.
4. Fasten the device in place on the device support using the star grip.
5. Check the device to ensure it is seated securely.
4.12 Using the trolley (REF 320.0070.2)
A trolley is available to make transporting the device easier.
WARNING
Risk of injury!
The device may only be mounted on the trolley intended for this purpose (REF
320.0070.2).
WARNING
Risk of injury!
If the brakes on the trolley’s rollers are not engaged, the device may roll out of position
during suction.
The brakes provided on the trolley must be used.
4.12.1 Mounting the device on the trolley
1. Use the device base and the recesses to position the device on the trolley.
2. Fasten the device in place on the trolley using the star grip.
3. Check the device to ensure it is seated securely.
To Next Page
Loading...
