ATN Zebra 12 Operator's And Safety Manual

OPERATOR’S AND SAFETY MANUAL
1NO0039UK-00
Zebra 12
15
 Do not transport panels or large elements when the machine is used outdoors: these
elements increase the wind surface and reduce the machine's stability.
 Do not pull or push an element outside the working platform. Acceptable manual force (total):
400N
 Do not use the machine as a crane.
 Do not use the machine to pull or push any objects.
 Do not attach the machine to any neighbouring structure. Never use any part of the machine
to stabilise or support any structure. Do not attach any electrical wires or other cables to the
platform.
2.3. CRUSHING AND COLLISION RISKS
 When the machine is moving, keep all
parts of the body inside the platform
guard rail.
 Prevent any obstacles from hitting or
hindering the commands or people
onboard the platform.
 Make sure that you do not lower the
platform onto any obstacles. It is
recommended that you retract the
telescope before lowering the platform.
 Warn the other occupants of the platform
before controlling a movement and obtain
their agreement where necessary.
 Make sure that non-operating personnel
are kept out of the area where the
machine is working. Warn personnel on
the ground to keep away from under the
platform when it is raised.
 Make sure that the operators of other
machines at a height and on the ground
are alerted to the lifting platform's presence. If necessary, place barriers around the area
where the machine is working and cut the power to overhead cranes.
 Note the presence of any obstacles around, above and below the platform before
commanding a movement.
 Adapt the movement speed according to the condition of the ground, the incline, the visibility,
the presence of people in the working area, obstructions on the machine's route and any
other factors likely to cause a collision or injury.
 Ask a person on the ground to guide you when visibility is reduced.
 Take into account the braking or stopping distances according to the movement speed.
Reduce speed when moving on slopes (platform in low position).
 It is recommended to wear protection equipment.

ATN Zebra 12 Specifications

General

Brand	ATN
Model	Zebra 12
Category	Boom Lifts
Language	English