ATN Zebra 12 Operator's And Safety Manual

OPERATOR’S AND SAFETY MANUAL
1NO0039UK-00
Zebra 12
16
DANGER
NEVER MOVE THE MACHINE OR MOVE PERSONNEL NEAR ELECTRICAL LINES OR
EQUIPMENT.
ALWAYS ASSUME THAT THE ELECTRICAL LINES OR APPLIANCES ARE LIVE
UNLESS YOU ARE SURE THAT THE POWER HAS BEEN CUT.
PERSONNEL ON THE GROUND MUST KEEP AWAY IF THE MACHINE IS BEING USED
NEAR ELECTRIC LINES OR POWERED EQUIPMENT.
IN THE EVENT OF CONTACT WITH AN ELECTRIC LINE OR POWERED APPLIANCE,
PERSONNEL ON THE GROUND MUST KEEP AWAY FROM THE MACHINE UNTIL THE
ELECTRIC POWER HAS BEEN CUT OFF.
Phase to phase voltage Minimum safe distance
0 to 300 V Avoid contact
300 V to 50 KV 3.05 metres
50 KV to 200 KV 4.60 metres
200 KV to 350 KV 6.10 metres
350 KV to 500 KV 7.62 metres
500 KV to 750 KV 10.67 metres
750 KV to 1000 KV 13.72 metres
2.4. ELECTROCUTION RISKS
 This machine is not insulated and does not offer any
protection when near or in contact with an electric
current.
 Maintain a minimum safety distance with electric lines
(insulated or otherwise) or powered devices. The
minimum distances indicated in the table below are
provided for information purposes. Regulations specific
to the country or site where the machine is used may
demand greater safety distances.
 Take into account the machine's movements and
possible swaying of the electric lines.
 Never raise the platform during a storm or lightning.

ATN Zebra 12 Specifications

General

Brand	ATN
Model	Zebra 12
Category	Boom Lifts
Language	English