ATN Zebra 12 Operator's And Safety Manual

OPERATOR’S AND SAFETY MANUAL
1NO0039UK-00
Zebra 12
72
8.5. REGENERATION OF THE PARTICLE FILTER (Option)
When a too high counterpressure is
detected on the outlet of the exhaust
manifold, the maintenance lights flash
on the control stations and the
following message is displayed on
the control module screen.
Even if the filter regeneration
operation can be punctually
postponed by pressing [F4], it is
recommended to carry it out at the
earliest possible time : if the clogging
in the filter becomes too important,
the filter regeneration may be not
perfect if not impossible.
- Drive the machine outside or in a
well-ventilated area..
- Fully lower the structure.
- Press [F2] to start the operation : the
diesel engine switches to high speed
for a 15 minute period.

ATN Zebra 12 Specifications

General

Brand	ATN
Model	Zebra 12
Category	Boom Lifts
Language	English