OPERATOR’S AND SAFETY MANUAL
1NO0039UK-00
Zebra 12
8- Hydraulic / fuel tank compartment: No oil leak on the hydraulic manifold or on the tank –
Connector on the hydraulic control valve and sensors correctly installed/connected – no
damaged electric cable – hydraulic oil level correct.
Fuel level – Presence of the fuel tank cap.
9- Control station on the ground: The control station switches are present and return to neutral
position – The emergency stop switch is operating correctly.
10- Structure position sensor.
11- Hydraulic cylinders.
12- Articulation pins: Presence of the pin lock screws.
13-Rotator
14- Guardrails : Condition – Access bar drops back into position correctly.
15- Platform control station: Correctly secured - The levers and switches are present and return
to neutral position – The validation pedal is correctly attached and is operating correctly.
The emergency stop switch is operating correctly.
( 12 )
( 1 ) ( 2 ) ( 3 )
( 7 )
( 5 )
( 2 )
( 15 )( 14 )
( 14 )
( 4 )
( 6 ) ( 7 )
( 13 )
To Next Page
Loading...
Need help?
General
