Setting Up Your t170
Getting Connected
15
2.3 Getting Connected
To make connections for your t170, please do the following:
1. Connect your t170 to your local network with an Ethernet cable.
2. Connect a keyboard and mouse to your t170.
3. Connect and turn on the monitor(s).
4. Connect your t170 to a power outlet using the AC adapter included in the package.
NOTE
• For detailed instructions on how to assemble the supplied AC adapter, please refer
to section “2.2 Assembling the AC Adapter” on page 14.
5. Connect other peripherals for your t170 if needed.
To Next Page
Loading...
