Atrust t170 - Updating Firmware from the Management Computer

Conguring Client Settings
Conguring System Settings
34
NOTE
• On a remote computer, an administrator will need this password to use the Shadow
feature (remote assistance) available in the Atrust Device Manager console. For
more information, please refer to the User’s Manual for Atrust Device Manager.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
NOTE
• When the Shadow feature is enabled, on t170, the icon will appear in the
Notication area of the Task bar. If this feature is currently being performed from a
remote computer, the icon will change its color to yellow
.
4.2.5 Updating Firmware from the Management Computer
Update Firmware allows users to update client rmware from the remote management computer to get the
client device up-to-date.
NOTE
• Ensure that your client has been added into a managed group under Atrust Device
Manager installed on a remote computer, and that you have imported client
rmware les into Atrust Device Manager. These are prerequisites of this feature.
• For more information on rmware update and Atrust Device Manager, please refer
to the User’s Manual for Atrust Device Manager.
To update client rmware from the remote management computer, please do the following:
1. On Atrust Client Setup, click System > Firmware Update.