A ss is tance s y s tem s
Operating
Applies to: vehicles with camera -based traffic sign recogni-
tion
Fig. 92 Instrument clus t e r: addi tiona l display
Accessing traffic sign recogn iti on
... Se lect: the first tab> Traffic signs.
Setting a speed warning
You can set a warn ing th reshold down to 10 mph
(15 km/h). The traffic sign for the current detect-
ed speed limit will blink in the disp lay if you ex-
ceed the set t hresho ld.
... Select in the Infotainment system:
IMENUI but-
ton >
Vehicle > left contro l button > Driver as·
sistan ce
> Speed war ning > Traffic sign based
warning .
Add itional display
If a view other than the traffic sign recognit ion is
selected in the instrument cluster disp lay, the
speed limit will be shown in another disp lay
~ fig. 92 . The cur rent applicable speed limit will
be shown there , if possib le with in the limits of
the system.
(D Tips
- An additional indicator appears in the head-
up display*.
- Your speed warning settings a re stored au-
tomatically and ass igned to the remote con-
tro l key in use .
Messages
Applies to: vehicles with camera-based traff ic sign recogn i-
tion
P!\i Traffi c sign recognition : current ly unavaila-
ble _ Camera view limit ed due to surrounding s
98
Function currently unavailable. Camera view re-
stricted due to surroundings
This message appears if the camera's vis ual fie ld
is covered ~
page 97, fig. 91. The system will
switch itself off.
la Traffic sign recognition : currently limit ed.
See owner's manual
This message appears if there is a malfunct ion in
the nav igation system, for example . The speed
limit d isplay is limited, wh ich increases the risk
of an incorrect d isp lay.
P!\i Traffic sign based speed warnin g: current ly
unavailable . See owner's manual
There is no warning when the set threshold is ex-
ceeded .
No tr affic sign information available
There is no valid navigation data and do speed
limits were detected. Or there is a recommended
speed but there is not a speed limit (for examp le
driving on and off the expr essway) .
Malfun ction! See owner's manual
The system cannot guarantee correct funct ion
and is switched off. See an autho rized Audi dea l-
er or autho rized Audi Serv ice Facility for assis -
tance.
Function not available in this country
The vehicle is in a country where the function is
not availab le.
Lap timer
Introduction
Applies to: vehicles with lap t imer
You can measure and analyze lap times with the
lap timer in the display.
Opening the lap timer
... Open the first Vehicle tab (trip computer) using
the l<11>I button on the multifunction steering
wheel.
... Sele ct on the multifunction steering wheel : left
cont rol button
> Lap time s. Ill-
To Next Page
Loading...
