Multifunction steering wheel
Telephone
Applies to: vehicles with multifunct ion steering wheel and
telephone
Fig. 167 Example : telepho ne functions in the driver infor-
mat ion system
Requirement: a cell phone must be connected to
the MMI
¢ page 174 and the telephone tab
must be displayed.
• Press the left control button on the multifunc-
tion steering wheel.
Depending on vehicle equipment, the following
functions may be available in the driver informa -
tion system.
-Accessing a contact : select and confirm Call
list/ Favorites/ Directory .
Select and confirm
a contact.
Directory contacts : the driver information sys-
tem only displays directory contacts that have a
phone number stored.
If several phone numbers
are stored with a contact, the list of stored num-
bers is displayed first when the entry is selected .
For more information about the displayed sym-
bols , refer to
¢ page 183.
Recent calls : the recent calls list contains all in-
coming, outgoing and missed calls.
Caller information: the name, phone number or
Unknown appears in the driver information sys-
tem display depending on if the caller has been
stored in the directory and if the phone number
has been transmitted.
Functions during an incoming call
- Answering a call :
press the left thumbwheel
when there is an incoming call .
162
- Declining a call: select and confirm Decline
when there is an incoming call.
- Ending a phone call : select and confirm End
call.
Functions during a phone call :
- Making an additional call :
select and confirm
Hold call. Press the left control button > Direc-
tory
or Call list > an entry.
- Answering a call while in a call and while
there is another call on hold:
select and con-
firm
Answer . The active call is replaced with the
incoming call .
Additional functions include:
Mute : if you select and confirm this function, the
other person on the phone cannot hear you. You
can hear the other person .
Holding/resuming a call : you can place the exist-
ing call on hold and res ume it again .
Swap call: you can alternate between two phone
calls at the same time. One of the calls will be on
hold. Selecting End call will end the active phone
call. A call that was placed on hold stays on hold
and can be taken off hold with Resume.
Conference call:
a call on hold and up to five ac-
tive parties (depending on the cell phone service
provider) can be added to a conference call. To
make an additional call, put all participants in
the current conference call on hold using
Hold
call .
By pressing the left control button, you can
make additional calls from the directory or the
call list. Resume takes all parties off hold .
(D Tips
- The telephone functions can only be con-
trolled with the multifunction steering
wheel if the telephone equipment was in-
stalled
at the factory .
- The telephone functions depend on the cell
phone and whether they are supported by
your cell phone service provider or not.
- The Call waiting function must be activated
in your cell phone and in the MMI in order to
be alerted when there is an incoming call .,.
To Next Page
Loading...
