• Press the release point c::> fig. 61 using the me -
chanical key c::> page 30, Key set and press the
button -arrow-
c::> fig. 60 . Pull the head restraint
out of the backrest at the same time
c::> ,&..
In stall ing th e head rest raints
• Slide the posts on the head restraint dow n into
the guides until the posts click into place.
• Press the button -arrow-
c::> fig. 60 and slide the
head restraint all the way down. You should not
be able to remove the head restraint from the
backrest without pressing the button .
A WARNING
- Always read and follow the applicable warn-
ings
c::> page 255 , Proper adjustment of
head restraints.
- Only remove the head restraints fo r the sec-
ond row seats when it is necessary for in-
sta lling a child safety seat c::> page 291,
Child safety.
Install the head restraint agai n
immediately once the child safety seat is re -
moved. Driving with the head restraints re-
moved or not in the upr ight position in-
creases the risk of serious injury.
Memory function
Description
Applies to: vehicles with memory function
Using the memo ry function, you can qu ickly and
eas ily store a pe rsonal seat profile for the driver
and recall the settings later. The memory func-
tion is controlled by the remote control key and
the memory buttons in the driver's door.
The drive r's seat profile is stored again and as-
signed to the remote contro l key each time the
vehicle is locked. When you open the door, the
seat profi le is automat ically reca lled . If two peo-
ple use the vehicle, it is recommended that each
person always uses their "own" remote control
key.
Two seat profiles can be stored each us ing the
~
memory buttons. Once they are stored, these
......
N seat prof iles can be se lected at any time.
r--.
N
......
g The fo llowing settings are stored :
:E
'<I"
S e ats and s torag e
Remote con- Memory but-
trol key ton
Driver Driver
Seat X X
Steer ing
X X
wheel*
Both exterior
mirrors*
X
X
Remote control key
Applies to : vehicles with memory function
The driver's seat profile con be assigned to the
remote control key when the vehicle is locked.
• Select in the Infotainment system: I MENU ! but -
ton
> Vehicle > left control button > Vehicle
setting s
> Seats > Driver's seat > Store set-
ting s on remote control key.
(D Tips
If you do not wish to have the seat profi le for
another driver assigned to the remote control
key, sw itch the memory function off in the In-
fotainment system.
Memory buttons
Applies to : vehicles with memo ry function
Fig. 62 Driver's door : memo ry f uncti on buttons
Storing a seat profil e
• Press the !SET I button. The LED in the button
turns on.
• Press memory button
[II or ill.
A signal tone will sound when it is successfu lly
stored.
59
To Next Page
Loading...
