EasyManua.ls Logo

Audi Q7 2018 - Page 24

Audi Q7 2018
398 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cockpi t o v erv ie w
- If the indicator li ght and message appear while
driving ,
the hill start assist or emergency brak-
ing function may be malfunctioning. It may not
be possible to set the parking brake or release
it once it has been set. Do not park your vehicle
on hills . See an author ized Audi dealer or au-
thorized Audi Service Facility for assistance .
Brake booste r: limited funct ionality. You can
cont inue driving. Please contact Se rvice
There is a malfunction in the brake booster. The
brake booster is available, but its effectiveness is
reduced . Braking behavior may be diffe rent from
how it normally functions and the brake pedal
may vibrate .
Drive to an authorized Aud i dealer or aut horized
Audi Service Facility immediately to have the
malfunct ion corrected.
A WARNING
- Read and follow the warn ings in
~ page 319, Working in the engine com-
partment
before open ing the hood and
checking the brake fl uid level.
- If the brake system indicator light does not
tu rn off or it t urns on while driv ing, the
brake fluid level in the reservoir is too low,
and this increases the risk of an accident .
Stop the vehicle and do not continue dr iv-
ing. See an authorized Audi dealer or au-
tho rized Audi Service Facility for assistance.
- If the brake syst em indicator light turns on
together with the ABS and ESC indicator
lights, the ABS/ESC regulating function may
be malfunctioning. Functions that stabilize
the vehicle are no longer available. This
could cause the vehicle to swerve, wh ich in-
creases the risk that the vehicle w ill slide .
Do not continue driving . See an author ized
Audi dealer or author ized Audi Service Facili-
ty for assist ance.
PARK/{®)!~ Electromechanical parking
brake
If the - (USA models) I. (Canada mod els)
indicator light t urns on, the park ing brake was
set .
22
If the - (USA mode ls). (Canada models) in-
dicator light is blinking, the braking force has not
built up enough or it has decreased. Select t he
"P" selector lever position to secure the vehicle.
Make sure the indicator light is off before you
start driving .
rlJ Parking brake: malfunction! Please contact
Service
There is a malf unction in the parking brake. Drive
to an authorized Audi dealer or authorized Audi
Service Facility immed iate ly to have the ma lfunc-
tion corrected.
Ill (USA models )/ ¢@) (Canada model s) Parking
brake: warning! Vehicle parked too steep
There is not enough braki ng for ce to hold the ve-
hicle in place. The brakes have overheat ed. The
vehicle could roll away even on a small incli ne.
Ill (USA model s)/ (C@) (Canada model s) Parking
brake: appli ed
If this message appears, press the brake pedal
first and then release the parking brake if neces-
sary.
II (USA models )/ ¢@) (Canada models) Parking
brake: emergency braking
The emergency braking function was triggered .
Plea se relea se parking brake
Release t he parking brake if this message ap-
pears.
Plea se press th e brake pedal to release the park-
ing brake
To release the parking brake, press the brake
pedal and press the ~ button at t he same time,
or start driving with hill start assist ~
page 83,
Starting to drive.
(D Tips
For additional informat ion on the parking
brake, see ~
page 81.
-L Cooling system
• Turn off engine and check coolant level. See
owner' s manual
...

Table of Contents