Audient iD48 - ID App & Firmware Update; Check for Firmware Updates

iD App & Firmware Update
11
Launch the iD Software Mixer
Application
Launch the iD48 Software Mixer application
by finding it in the following folder:
Macintosh HD > Applications > iD
Start > All Programs > Audient > iD
On macOS, the iD Software Mixer Application
will launch into the Menu bar, in the top right
corner of the screen. Click on the small iD icon
to access the features of the application.
On Windows, the iD Software Mixer
Application will launch into the system tray,
typically in the bottom right corner of the
screen. Right-click on the iD icon to access the
features of the application.
For more information on the iD Software
Mixer Application feature set, please refer to
page 30 onwards of this manual.
You can manually check for updates by going
to the Help menu and selecting ‘Check
for Updates’. It will notify you if you’re on the
latest version of firmware or if you need to
update.
Registration With Audient ARC
When you first open the iD Software Mixer
Application, a window will open asking you
to register your unit to Audient ARC. Simply
follow the instructions on-screen to create an
account and register your unit.
This will give you access to free innovative
software and services; meaning you’ll have
everything you need to get recording straight
away.
Please note that second-hand purchases are
not eligible for registration on Audient ARC,
please read our ARC Terms and Conditions
for more information: https://audient.com/
arc-terms-and-conditions/
If you plan on registering the product at a later
date, you can simply close the registration
window. You’ll see the window again the next
time you use the unit.
Check for Firmware Updates
If your computer is connected to the internet,
the iD Software Mixer Application will check
for firmware updates whenever a unit is
connected. If there is a firmware update
available then the iD Software Mixer
Application will notify you again the next time
you use the unit.