Audient iD48 - Technical Specifications

59
Technical Specifications
Microphone Preamplifier:
Line Inputs:
Digital Input:
Word Clock Input/Output:
Digital Output:
DSP Mixer Latency
Round Trip (in-to-out)
MIC GAIN:
LINE GAIN:
PHANTOM POWER:
MIC EIN:
CMRR:
MAXIMUM INPUT LEVEL:
INPUT IMPEDANCE (Mic)
INPUT IMPEDANCE (Line)
FREQUENCY RESPONSE:
CROSSTALK:
THD+N @0dBu (1kHz):
SNR:
XLR:
1/4” JACK:
PAD:
HPF:
LINE GAIN:
MAXIMUM INPUT LEVEL:
THD+N @0dBu 1kHz:
2 x 8-CHANNEL ADAT:
2 x 4-CHANNEL ADAT:
STEREO S/PDIF:
WORD CLOCK:
WORD CLOCK INPUT TERMINATION:
2 x 8-CHANNEL ADAT:
2 x 4-CHANNEL ADAT:
STEREO S/PDIF:
44.1kHz
48kHz
88.2kHz
96kHz
0 to +68dB (with 10dB Gain Boost)
-10 to +58dB (with 10dB Gain Boost)
48v +/-4v @ 10mA/Channel
-127dBu
>80dB @ 1kHz
+18dBu
3kΩ balanced
10kΩ balanced
±0.5dB 10Hz to 65kHz
<-115dB @ 1kHz & 10kHz
0.0016% (-96dB)
99dB A-Weighted
Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
TIP (Hot), RING (Cold) & SLEEVE (Shield)
-10dB
-3dB @ 100Hz, 2nd Order (12dB/Octave)
-10 to +48dB
+22dBu
0.0013%, -97dB
44.1kHz to 48kHz
88.2kHz to 96kHz (SMUX)
44.1kHz to 96kHz (Stereo)
44.1kHz to 96kHz
75R
44.1kHz to 48kHz
88.2kHz to 96kHz (SMUX)
44.1kHz to 96kHz (Stereo)
0.344ms
0.312ms
0.188ms
0.177ms
Analogue to Digital Converter:
MAXIMUM INPUT LEVEL:
DIGITAL REFERENCE LEVEL:
INPUT IMPEDANCE:
CROSSTALK:
FREQUENCY RESPONSE:
THD+N @ -1dBFS (1kHz):
DYNAMIC RANGE:
1/4” JACK:
+18dBu (0dBFS digital maximum)
+18dBu = 0dBFS
>10k Ω Balanced
<-118dB @ 1kHz, <-115dB @ 10kHz
±0.5dB 10Hz to Fs/2 (Nyquist)
<0.0003% (-110dB)
120dB A-weighted
TIP (Hot), RING (Cold) & SLEEVE
(Shield)
MAXIMUM OUTPUT LEVEL:
OUTPUT IMPEDANCE:
CROSSTALK:
FREQUENCY RESPONSE:
THD+N @ -1dBFS (1kHz):
DYNAMIC RANGE:
MAX LEVEL INTO 30R:
MAX LEVEL INTO 60R:
MAX LEVEL INTO 600R:
1/4” JACK:
NO. OF INPUT CHANNELS:
NO. OF OUTPUT CHANNELS:
CONNECTOR:
INCLUDED CABLES:
*Maximum of 24 unique channels at one time. See page 36
of this manual for more information.
+18dBu (0dBFS digital maximum)
<50 Ω unbalanced
<-117dB @ 1kHz, -112 @ 10kHz
±0.5dB 10Hz to Fs/2
<0.00023% (-112dB)
121dB un-weighted, 124dB A-weighted
4V Peak, 2.85V RMS, 530mW
5.82V Peak, 4.12V RMS, 565mW
8.71V Peak, 6.16V RMS, 126mW
TIP (Hot), RING (Cold) & SLEEVE (Shield)
24 (8 Analogue, 16 Digital)
32 (16 Analogue, 16 Digital)*
USB Type-C
1m USB 2.0 Type-C to Type-C
Headphone Outputs:
USB 2.0 High Speed:
D.I GAIN:
MAXIMUM INPUT LEVEL:
INPUT IMPEDANCE:
FREQUENCY RESPONSE:
THD+N @ 0dBu (1kHz):
SNR:
1/4” JACK:
0 to +68dB (with 10dB Gain Boost)
+15dBu
500kΩ unbalanced
±0.5dB 10Hz to 40kHz
<0.06%
96dB A-weighted
TIP (Hot), RING (Cold) & SLEEVE
(Shield)
D.I / Instrument Input:
Digital to Analogue Converter
MAXIMUM OUTPUT LEVEL:
OUTPUT IMPEDANCE:
CROSSTALK:
FREQUENCY RESPONSE:
THD+N @ -1dBFS (1kHz):
DYNAMIC RANGE:
1/4” TRS JACK:
+18dBu (0dBFS digital maximum)
<100 Ω
<-120dB @ 1kHz, <-115 @ 10kHz
±0.5dB 10Hz to Fs/2 (Nyquist)
<0.00026% (-111.5dB)
124dB un-weighted, 126.5dB A-weighted
TIP (Hot), RING (Cold) & SLEEVE (Shield)