Audient iD48 - Input Channel Types

iD Software Mixer Application
30
Input Channels - Channel Types
The iD Software Mixer Application features
three types of input channels:
Mic Inputs
These are the inputs where you will see the
signal from the iD48’s eight analogue inputs.
Digital Inputs
These are the inputs from the iD48’s optical
inputs. The number of digital inputs present
on the iD Software Mixer Application
depends on the digital input type (S/PDIF or
ADAT) and the sample rate being used.
DAW Returns
These are the signals being played back
from your DAW. The iD48 has 10 DAW Return
Channels, allowing you to set up multiple cue
mixes or sends to hardware outboard gear.
Using these three channel types you can
build up your main monitor mix and up to
four additional cue mixes.
It’s important to note that the iD
Software Mixer Application only
controls the monitoring of the iD48.
Changes made to the iD Software
Mixer won’t aect the level present in
your DAW or audio software.