44
Talkback
The Talkback source allows the talkback
input to be taken from one of iD48’s internal
inputs or from an external device connected
to the host computer (such as a built-in
microphone or USB microphone).
When you select an internal input as your
Talkback channel, the corresponding
channel in the iD Software Mixer will be
changed to a Talkback channel which will
have a TB button in the centre.
If External Device is selected then you’ll
see a drop-down menu to choose which
external device you wish to use. When using
an external device, the talkback signal will
appear on channel DAW 10.
Talkback can be turned on or o by pressing
the TB button on that channel, the TB button
in the master section or using one of the
F-keys if assigned to the TB function.
The Talkback is only sent to the CUE mixes
as you would not want your talkback to
also playback through the Main Speakers.
Therefore, faders will only appear for the
Talkback channels on the Cue mixes, not on
the Main Mix.
To Next Page
Loading...
