EasyManuals Logo

Audio Precision Portable One Plus Access User Manual

Audio Precision Portable One Plus Access
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
For the dBV and dBu units, the reference is a predefined value. For
the dBr unit, the reference is specified by the user. For the dBg unit,
the reference is always the current generator amplitude. For the dB
unit, the reference is another measured amplitude, which depends
upon the measurement function.
There are two ways to set the reference value for the dBr unit. The
first is to press the dBr ZERO button, located near the top right corner
of the display. This will set the dBr reference value to the current
amplitude of the main measurement (shown in the top left section of
the display). The second way is to go to the Analyzer Only panel (by
pressing INSTRUMENT MODE PANELS several times) and then select
the dBr unit for the main measurement. The current value of the 0
dBr (the reference value) will be shown across the center of the
display, and it may be changed using the AMPLITUDE controls.
The dB unit is available in Ratio, THD+N, and SINAD measurement
functions. All of these modes have an implied reference for the main
measurement, which is the secondary measurement shown in the
upper center of the display. This is the reference value used for the dB
calculation.
The % unit can be used for amplitude or frequency measurements.
The % unit for amplitude is available in THD+N and SINAD
measurement functions. It also uses the secondary measurement,
shown in the upper center of the display, for a reference. It calculates
what percent the main measurement is of the secondary measurement.
The X/Y unit is available only in Ratio mode. The reading is a raw
result of dividing one amplitude reading by another. This is usually
used for gain or attenuation through a device.
& For more
information on
moving among
the panels, see
page 4-1.
4 Operation
Operation Units : Amplitude units
4-72 Portable One Plus Access User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Audio Precision Portable One Plus Access and is the answer not in the manual?

Audio Precision Portable One Plus Access Specifications

General IconGeneral
BrandAudio Precision
ModelPortable One Plus Access
CategoryTest Equipment
LanguageEnglish

Related product manuals