Getting Started
Front Cover and Tilt Bail
The two square blue buttons on top of the instrument are releases for
the protective front cover. Press these buttons (as shown in the
following figure), and then pivot the cover down to a horizontal
position and slide it into the storage slot below the front panel .
Notice that on the inside of the cover are simplified operation
instructions for use as a quick reminder of common feature usage.
Cover Release
Buttons
Figure 2-1. Cover Release Buttons
2
Getting Started
Portable One Plus Access User's Manual 2-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com