Need help?Do you have a question about the Audio Precision ATS-1 Access and is the answer not in the manual?
General| Type | Audio Analyzer |
|---|---|
| THD+N | <-110 dB (typical) |
| Sample Rate | Up to 192 kHz |
| Channels | 2 |
| Input Impedance | 100 kΩ |
| Output Impedance | 50 Ω |
| Dynamic Range | > 120 dB |
| Signal-to-Noise Ratio (SNR) | > 120 dB |
Procedure for initial power-up and selecting the correct line voltage.
Steps to perform a functional self-test to verify instrument operation.
Description of the instrument's physical interface, buttons, and ports.
Procedure for measuring Total Harmonic Distortion plus Noise.
How to identify the current line voltage setting on the instrument.
Procedure to verify and replace fuses according to voltage settings.
To Next Page
