Safety Symbols
The following symbols may be marked on the panels or covers of
equipment or modules, and are used in this manual:
WARNING! - This symbol alerts you to a potentially hazardous
condition, such as the presence of dangerous voltage that could pose a
risk of electrical shock. Refer to the accompanying Warning Label or
Tag, and exercise extreme caution.
ATTENTION! - This symbol alerts you to important operating
considerations or a potential operating condition that could damage
equipment. If you see this marked on equipment, consult the User’s
Manual or Operator’s Manual for precautionary instructions.
FUNCTIONAL EARTH TERMINAL - This symbol marks a terminal
that is electrically connected to a reference point of a measuring circuit
or output and is intended to be earthed for any functional purpose
other than safety.
PROTECTIVE EARTH TERMINAL - This symbol marks a terminal that
is bonded to conductive parts of the instrument. Confirm that this
terminal is connected to an external protective earthing system.
ATS-1 Access User's Manual vii
To Next Page
Loading...
Need help?
General
