Audio Precision ATS-1 Access User Manual

When you connect your printer, you will want to select the data format
for printer output, depending on what type of printer you have. This
selection is made on the Setup Panel.
GPIB Interface
The ATS-1 Access provides a GPIB (also called IEEE-488) interface
on its rear panel for connection to a host computer. The host
computer can then control the instrument for a variety of automated
applications.
The computer must be equipped with appropriate GPIB controller
hardware (available on a plug-in card) and GPIB control software.
Connection from the host computer to the ATS-1 Access requires a
standard GPIB cable. These same cables may also be used to connect
to other devices in a GPIB chain.
Front-panel indicators show the status of the GPIB signals (see page
3-5).
For more information on using GPIB, see the ATS-1 GPIB
Programmers Reference Manual.
Power Cord Connector and Line Voltage Selector
The power cord connection and line voltage verification is described
on page 2-1. The fuse information and changing the line voltage
selection is covered in Appendix A.
& For more
information on
printer data formats
and printing, see
page 4-46.
3 Operation
Operational Overview Rear Panel Connectors
ATS-1 Access User's Manual 3-27

Audio Precision ATS-1 Access Specifications

General

Brand	Audio Precision
Model	ATS-1 Access
Category	Test Equipment
Language	English