Audio Precision Portable One Plus Access User Manual

Options Label
The Options Label specifies any options that are installed in your
Portable One Plus Access. It is located in the bottom right corner of
the rear panel.
The options label is filled out by the manufacturing technician when
configuring the instrument for the customer. If the P1-IMD,
P1DD-488, or EGZ options are installed, an X will be placed in the
appropriate box.
If option filters are installed, the type of filter will be marked in the
appropriate Optional Filters box.
The date of original manufacture will be written in the appropriate box.
If there are any other unique characteristics of the unit, codes will be
placed in the ‘Special’ box. These may be special modifications or
requirements from certain upgrade combinations.
Installed Option
Filters
Date of
Manufacture
IMD Option Installed
GPIB Option Installed
EURZ Option Installed
Other Unique
Characteristics
Date of manufacture Code
Audio Measurement System
PO RTABLE O NE PLUS
Aux 2:
Aux 1:
Optional Filters:
Installed Options:
Special
EGZ European Impedances
P1P-488 GPIB Interface
P1-IMD Intermod. Distortion
Figure 2-6. Options Label
2 Setting Up
Getting Started Options Label
2-8 Portable One Plus Access User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Audio Precision Portable One Plus Access Specifications

General

Brand	Audio Precision
Model	Portable One Plus Access
Category	Test Equipment
Language	English