The upper left soft key controls the print mode. The proper print
mode to select depends on the type of printer connected to the port.
The two options are ‘PCL Graph’ and ‘IBM Graph’.
The upper center section of the display shows the real-time clock. The
date is shown on top, in the order year-month-day. The time is shown
on bottom, in 24-hour format as Hours:Minutes:Seconds.
To set the date or time, press the upper center soft key. The year will
be highlighted. The year can be changed using the FREQUENCY
controls. The INC and DEC keys will change the year in increments of
1 year. The x10 and ÷10 keys will change the year in increments of
10 years. The FREQUENCY knob may also be used.
When the year is set correctly, press the upper center soft key again.
The month will be highlighted, and can be set in a similar fashion. The
day, hour, minute, and second can be set with subsequent presses of
the soft key. The clock will restart as soon as the soft key is pressed
with the seconds highlighted.
The lower center soft key controls the display inversion. Inverting the
display causes the letters to appear white, with a blue background,
instead of blue against a white background.
The upper right and lower right sections of the display, and the upper
right and lower right soft keys, control the step sizes used by the
FREQUENCY and AMPLITUDE INC and DEC keys.
& For more
information on
the use of INC
and DEC
controls, see
pages 4-6
& For more
information on
selecting the
printer mode
and printing,
see page 4-63.
4
Operation
Overview : Setup Panel Operation
Portable One Plus Access User's Manual 4-9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
