The INPUT A button will select input A for measurement. The INPUT
B button will select input B for measurement. Pressing GEN after
selecting the measurement channel will select the gen-mon path for
that channel.
Wow and flutter of 3-head tape machines should not be measured
during simultaneous record-reproduce mode, since this will result in
spectral nulls which can give erroneously low readings.
4 Operation
Operation Controlling the Analyzer : W+F (Wow and Flutter)
4-50 Portable One Plus Access User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
