22
Setting the ATW-DR3120/ATW-DR3120DAN
Setting the MAC address
1. From the menu screen, turn the control dial, select [NETWORK],
and then press the control dial.
2. Turn the control dial to select [MAC ADDRESS].
Setting the DANTE
This setting is used only for the ATW-DR3120DAN.
Displaying the device name and channel label
1. From the menu screen, turn the control dial, select [DANTE],
and then press the control dial.
2. Turn the control dial to select [INFO].
Setting the DANTE’s IP
1. From the menu screen, turn the control dial, select [DANTE],
and then press the control dial.
2. Turn the control dial, select [IP SETTING], and then press the
control dial.
3. Select an item you want to set and press the control dial.
IP Mode Set how to obtain IP addresses.
[Auto]: IP addresses are automatically
assigned.
[Static]: The specified static IP addresses
are used.
IP Address* Specify static IP addresses.
Subnet Mask* Set the subnet mask.
Gateway* Set the gateway.
* This item can be set only when [IP Mode] is set to [Static].
4. Set each item.
Setting the MAC address
1. From the menu screen, turn the control dial, select [DANTE],
and then press the control dial.
2. Turn the control dial to select [MAC ADDRESS].
Checking the version of the DANTE
This function displays product information, such as the version of the
DANTE.
1. From the menu screen, turn the control dial, select [DANTE],
and then press the control dial.
2. Turn the control dial to select [VERSION].