30
Achieving stable reception
Low RF signal may result if there are obstructions between receiver antennas and transmitter(s). In such a case, reposition the antennas to get
better reception. Use external antennas (sold separately) if the installation space is limited.
Rack-mounting the receiver
• Screws for rack-mounting the receiver are not included.
• Consider ventilation when rack-mounting to avoid heat building up in the rack.
• When installing the product on a rack, make sure that the temperature inside the rack does not reach or exceed 45°C. Higher temperatures may
negatively affect the internal parts of the product, causing the product to malfunction.
• Ensure there is at least a 10-millimeter space between the product and other devices or the top, bottom, and side faces of the rack.
• To ensure proper ventilation, do not place any objects around the rear of the product.
• The required rack specifications are as follows:
- EIA-standard 19-inch rack
- 1U-size attachable rack
- Rack with a shelf on which the product is placed or a guide rail that supports the product
• You can ensure that the product is fixed in place in the rack more stably by using commercially available joint parts to mount the product on the
rear guide rail with screws.
To Next Page
Loading...
Need help?
General
