Audio Technica AT-LP3XBT User Manual

33
Care
Turntable body
When the turntable body is dirty or dusty, first disconnect the AC adapter, and then wipe off the dirt and dust with a
soft, dry cloth.
Do not use benzenes, thinners, etc.
If the felt mat gets dirty, it can easily scratch the record, so remove the felt mat periodically and wipe off any dust.
When storing the product for a long time, disconnect the AC adapter from the outlet and wrap the equipment in
plastic; do not allow it to become damp.
Stylus tip and records
If dirt and grime are stuck to the stylus tip, clean it as needed. Before cleaning, disconnect the AC adapter from the
outlet.
We recommend using a stylus cleaner (sold separately by Audio-Technica) if the stylus tip is considerably dirty. Clean
the stylus tip by moving the brush from the rear to the front of the stylus tip.
For more details on record and stylus cleaners (sold separately by Audio-Technica), visit the Audio-Technica website
(https://www.audio-technica.com/).

Audio Technica AT-LP3XBT Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC motor
Product color	White
Wow & flutter	0.2 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Aluminum
Signal-to-Noise Ratio (SNR)	60 dB
Frequency range	2402 - 2480 Hz
Power supply type	AC
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
Power consumption (typical)	2 W
Quantity	1
Cables included	RCA
Dust cover included	Yes
Bluetooth version	5.2
Bluetooth profiles	A2DP
USB ports quantity	-

Weight and Dimensions

Depth	374 mm
Width	435.6 mm
Height	128 mm
Weight	5000 g