Audio Technica AT-LP3XBT User Manual

41
When the turntable is moved
Using the product’s original packaging materials, pack the turntable in the reverse order of unpacking it. If you do not
have the original packaging materials, take the following measures:
After disconnecting the AC adapter from the outlet, remove the felt mat and platter, and then wrap the turntable
body so that it does not get damaged. If the product is moved while the platter is still seated, it may damage the
spindle.
Remove the counterweight.
Remove the headshell from the tonearm with the cartridge’s protector attached, and then wrap the entire headshell
assembly so that it does not get damaged.
Use a string or something similar to tie the tonearm to the rest so that it does not move.
Wrap the turntable body with paper or a soft cloth so that it does not get damaged.

Audio Technica AT-LP3XBT Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC motor
Product color	White
Wow & flutter	0.2 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Aluminum
Signal-to-Noise Ratio (SNR)	60 dB
Frequency range	2402 - 2480 Hz
Power supply type	AC
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
Power consumption (typical)	2 W
Quantity	1
Cables included	RCA
Dust cover included	Yes
Bluetooth version	5.2
Bluetooth profiles	A2DP
USB ports quantity	-

Weight and Dimensions

Depth	374 mm
Width	435.6 mm
Height	128 mm
Weight	5000 g