EasyManuals Logo

AudioCodes Mediant 2000 Installation Guide

AudioCodes Mediant 2000
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Mediant 2000
Mediant 2000 30 Document #: LTRT-70105
4 Changing the Mediant 2000 Username and
Password
To prevent unauthorized access to the Embedded Web Server, two levels of security are
available: Administrator and Monitoring. Each employs a different username and password.
Users can access the Embedded Web Server as either:
Administrator - all Web screens are read-write and can be modified (default username
‘Admin’, default password ‘Admin’).
Monitoring - all Web screens are read-only and cannot be modified. In addition, the following
screens cannot be accessed: ’Reset‘, ‘Save Configuration‘, ‘Software Upgrade Wizard’, ‘Load
Auxiliary Files’, ‘Configuration File’ and ‘Regional Settings’. The ’Change Password‘ screen
can only be used to change the monitoring password (default username ‘User’, default
password ‘User’).
It is recommended that you change the default username and password of the security mode you
use to access the Embedded Web Server.
¾ To change the username and password, take these 5 step:
1. Access the Embedded Web Server (refer to Section 3.3 on page 19).
2. Open the ‘Change Password’ screen (Advanced Configuration menu > Change
Password); the ‘Change Password’ screen is displayed.
Figure
4-1: Change Password Screen in Administrator Mode
3. In the ‘User Name’ and ‘New Password’ fields, enter the new username and the new
password respectively. Note that the username and password of both levels can be a
maximum of 19 case-sensitive characters.
4. In the ‘Confirm Password’ field, reenter the new password.
5. To apply the new username and password to the Administrator level:
Click the button Change Administrator Password; the new username and password are
applied and the ‘Enter Network Password’ screen appears, shown in Figure
3-2. Enter the
updated username and password in the ‘Enter Network Password’ screen.
To apply the new username and password to the Monitoring level:
Click the button Change Monitoring Password; the new username and password are
applied.

Table of Contents

Other manuals for AudioCodes Mediant 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 2000 and is the answer not in the manual?

AudioCodes Mediant 2000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 2000
CategoryGateway
LanguageEnglish

Related product manuals