Installation Manual 52 Document #: LTRT-83506
Mediant 1000
Notes:
• Before you can load an ini or any auxiliary file, you must first load a cmp
file.
• When you activate the wizard, the rest of the Web interface is
unavailable. After the files are successfully loaded, access to the full Web
interface is restored.
• You can schedule automatic loading of these files using HTTP, HTTPS,
FTP, or NFS (refer to the Product Reference Manual).
¾ To use the Software Upgrade Wizard:
1. Stop all traffic on the device (refer to the note above).
2. Open the 'Software Upgrade Wizard' (Management tab > Software Update menu >
Software Upgrade Wizard); the 'Software Upgrade Wizard' page appears.
Figure 3-9: Start Software Upgrade Wizard Screen
3. Click the Start Software Upgrade button; the 'Load a CMP file' Wizard page appears.
To Next Page
Loading...
Need help?
General
