41
USER'S MANUAL
bit One HD /
6
Auto Chimes
: activate this function by ticking the Enable box to switch
to the main Master input each time a “Gong Signal” coming from the car
should be heard.
Functions Description:
A. Threshold: function to set the minimum threshold level of the “Gong Signal”
coming from the Head Unit Master input.
The operation levels range from 0 dB to -96 dB.
Advanced menu
Selecting the box as shown in the picture to the side the advanced setup
menu is activated, essential when adjusting the “Auto Chimes” function.
A. Attack: function to set the starting time for the auxiliary input to activate
The operation levels range from 13 ms to 680 ms.
B. Release: function to set the turn off time of the auxiliary input activated.
The operation levels range from 13 ms to 680 ms.
7
Power-On From HiLev
: select this entry to activate the bit One HD turn
on using a high level signal (ART, Auto Remote Turn On), available on
the CH1 and CH2 channels.
8 Master Delay Compensation: select this entry to enable/disable the
Head Unit time delays compensation. This function is available if during
the “I/O Conguration Wizard”phase the “Master Input Delay” procedure
has been performed
(see section 8.3.7).
9
Startup/Shutdown Delays: function to modify the bit One HD startup
and shutdown delays.
• StartUp Time: delay between the device startup and the output
audio turn on. Each amplier, when starting up, has its own delay
before becoming operative. By setting the Startup Time to a value
equal to or higher than the longest of these delays a synchronized
startup of the audio of the entire system can be achieved.
• Shutdown time: delay between the turn off/deactivation of the
REMOTE OUT signal to the ampliers and the bit One HD shutdown.
Acting on this parameter is not generally essential but it could useful
to decrease it when ampliers in the system produce a “Bump” while
shutting down.
10
Language: to change the language select your preference among the
ones available on the menu.
8