p 2/58
Technical Manual NAM-BL4x-MT-EN-C
The information in this document is the property of Automatic Systems and is confidential. The consignee withholds from using it for anything other than the use of the products or the execution of the
project to which they belong and withholds from communicating it to third parties without prior written agreement from Automatic Systems. Document subject to change without prior notice.
Document revisions
Revision
no.
Date Written
by
Checked by Subject
A 2011-09-22 SSA First edition
B 2012-05-09 SSA - SR barrier type added (all through manual)
- Speed controller adjustment procedure updated (CH 5.1)
- Spring adjustment table updated (CH 5.2)
- Wiring diagram updated (CH 9)
C 2013-02-08 JPS SSA - Component list (CH 2.1)
- Operating Principle (CH 2.2)
- Mechanical locking of the arm (CH 2.3)
- Positionning of the equipment (CH 4.2)
- Wiring diagram updated (CH 9)