EasyManuals Logo

Autotrol Logix 764 User Manual

Autotrol Logix 764
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Level l Programming - 764 Control with 255 Valve, 8 Cycle Conditioner
Note: If one of the following conditions occur:
control displays Err3 and goes to home position or
power outage discharges the supercapacitor and when power is restored and the time of day is reset; the
Regen Icon will begin flashing. This indicates that a delayed regeneration will occur at the next programmed
time of regeneration. If a delayed regeneration is not desired, press the REGEN Button to disable the
delayed regeneration and the system will regenerate by water usage.
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
KG
1. Resin Volume
Select correct resin volume
2. Time of Day (12 hr.)
Set to time of day
Note: Setting includes PM indicator.
3. Day of Week
Set to actual day of the week
4. Time of Regeneration
Set to desired time of regeneration
5. Days Override
Leave at 0 to disable
or
Set to desired days between
regeneration
7. Salt Dosage
Set to desired desired dosage
lbs per cubic feet of resin
Screen Buttons to Description Range
Press
Days:1
to
99
Lbs/f
t
3
3
to
18
or
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
press
PM
Cubic feet: 0.25
to
3.00
Lbs/ft
3
Time/Day
Regeneration Time
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
9. Hardness
Set to actual water hardness
in grains per gallon
Grains/gal: 3
to
200
or
press
press
then
8. Capacity
Capacity calculated by Logix Control
Use to OVERRIDE calculated capacity
1
to
900
or
press
press
then
Kilograins:
:
to override
Control programming is complete
Hardness
Hardness
Hardness
Hardness
Hardness
Hardness
Hardness
Hardness
Time/Day
Regeneration Time
Time/Day
Regeneration Time
Time/Day
Regeneration Time
Time/Day
Regeneration Time
Time/Day
Regeneration Time
Time/Day
Regeneration Time
Time/Day
Regeneration Time

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Autotrol Logix 764 and is the answer not in the manual?

Autotrol Logix 764 Specifications

General IconGeneral
BrandAutotrol
ModelLogix 764
CategoryControl Unit
LanguageEnglish

Related product manuals