Avalue Technology EMX-SKLUP - IT8528 Super IO Configuration

User’s Manual
EMX-SKLUP User’s Manual
47
Item
Options
Description
Me FW Image Re-Flash
Disabled[Default],
Enabled
Enable/Disable Me FW Image Re-Flash
function.
3.6.2.5 IT8528 Super IO Configuration
You can use this item to set up or change the IT8528 Super IO configuration for serial ports.
Please refer to 3.6.2.5.1~ 3.6.2.5.6 for more information.
Item
Description
Serial Port 1 Configuration
Set Parameters of Serial Port 1 (COMA).
Serial Port 2 Configuration
Set Parameters of Serial Port 2 (COMB).
Serial Port 3 Configuration
Set Parameters of Serial Port 3 (COMC).
Serial Port 4 Configuration
Set Parameters of Serial Port 4 (COMD).
Serial Port 5 Configuration
Set Parameters of Serial Port 5 (COME).
Serial Port 6 Configuration
Set Parameters of Serial Port 6 (COMF).