Locking and unlocking the keypad
Locking and unlocking the keypad in idle mode
About this task
Use the following procedure to lock the keypad and prevent accidental key presses.
Procedure
Lock the keypad during a call.
1. To lock the keypad, press the Key lock, and Upper and Lower case (
) key.
2. Press the Lock soft key.
Unlock the keypad during a call.
3. To unlock the keypad, press the Key lock, and Upper and Lower case ( ) key.
The system displays the message Unlock?.
4. Press the Yes soft key.
Note:
You can answer or reject an incoming call when the keypad is locked. If the WinPDM
or Device Manager has an emergency call configured, you can make an emergency
call when the keypad is locked.
Locking and unlocking the keypad during a call
About this task
Use this procedure to lock the keypad during a call and prevent pressing the keys accidentally.
This is useful when a headset is used and the handset is attached to a pocket or a belt.
Procedure
Lock the keypad during a call.
1. To lock the keypad, press the Key lock, and Upper and Lower case (
) key.
2. Press the Lock soft key.
Unlock the keypad during a call.
Basic Operation
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 28
Comments on this document? infodev@avaya.com