Figure 9: Screw the swivel-type clip into position
Easy Replacement of Handset
Easy replacement can be used if a handset needs to be replaced due to, for example, a broken
display.
Note:
Easy replacement is not supported when using DP1 Desktop Programmer.
Note:
If the electrical connection is damaged, it is not possible to follow the Easy Replacement
procedure. Depending on the fault, it might work to do a replacement through WinPDM or
Device Manager.
The following settings are replaced during easy replacement:
• DECT registration
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
Starting Easy Replacement Procedure
About this task
This task suggests necessary requirements before starting easy replacement procedure.
Maintenance
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 72
Comments on this document? infodev@avaya.com
To Next Page
Loading...
