Display Settings
Changing the screen saver
About this task
You can set the screen saver to one of the following:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is black when a call is in progress.
When the handset with the screen saver set to Information is in a charger, the Owner ID is
displayed even if the handset is switched off. This simplifies identification when many handsets
are in a charging rack.
Procedure
1. Press Menu.
2. Select Settings.
3. Select Display > Screen saver.
4. Select one of the following:
• Information
• Black
• Black also in call
5. Press Back.
Note:
When charging the handset in a DP1 Desktop Programmer or CR3 Charging Rack,
information is replaced by the large license indicator shield. When in the desktop
charger it is the same as when out of the charger.
Changing brightness
Procedure
1. Press Menu.
2. Select Settings.
3. Select Display > Brightness.
4. Select one of the following:
• Normal
Customizing Avaya 3730 handset
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
