Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 101
RINGTONES Null Specifies a list of audio files that deskphones
download as ring tones. The users can select the
required ring tone from the downloaded list.
For more information, see Downloadable ring
tones.
RINGTONESTYLE 0 Specifies the style of classic ring tones that the
deskphone displays. You can provide the following
values:
● 0: To display the North American ring tones
● 1: To display the European or extended ring
tones
RINGTONES_UPDATE 0 Specifies whether the deskphone at reset or start
up sends a query to the file sever to check for the
updated version of downloadable ring tones. You
can assign the following values to this parameter:
● 0: The deskphone does not check for the
updated version of downloadable ring tones,
but downloads any new audio file.
● 1: The deskphone checks for the updated
version of downloadable ring tones and
downloads any audio file that has an
updated version.
ROUTER 0.0.0.0 Address(es) of default router(s) / gateway(s) in the
IP network. Range is 7-127 characters defining one
or more IP Addresses in dotted decimal format,
separated by commas without any intervening
spaces.
RTCPCONT 1 Enables/disables the RTCP in parallel to RTP
audio streams. Values are 0=RTCP disabled,
1=RTCP enabled.
RTCPMON " " (Null) RTCP Monitor IP or DNS address to be used as
destination for RTCP monitoring. Zero to 255
characters: zero or one IP addresses in dotted
decimal or DNS name format. Note that this value
is only set via SET command in settings file if
operating in a NON-Avaya environment,
otherwise this value is retrieved via PPM.
RTCPMONPERIOD 5 RTCP Monitor report period. Valid range = 5 - 30
Interval in seconds for sending out RTCP
monitoring reports.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
