Administering deskphone options
102 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
RTCPMONPORT 5005 RTCP monitor port number. TCP/UDP port to be
used as destination port for RTCP monitoring. Valid
range is 0-65535. Note that this value is only set via
SET command in settings file if operating in a
NON-Avaya environment, otherwise this value is
retrieved via PPM.
RTP_PORT_LOW 5004 Specifies lower limit of a port range to be used by
RTP/RTCP or SRTP/SRTCP connections, for
example, to adapt to firewall traversal policies.
Values: 1024-65503.
RTP_PORT_RANGE 40 Specifies the width of the port range to be used by
RTP/RTCP or SRTP/SRTCP connections, for
example, to adapt to firewall traversal policies. The
upper limit is calculated by the value of
RTP_PORT_LOW plus the value of
RTP_PORT_RANGE, taking into consideration the
overall limit of 65535. Values: 32-64511.
SCREENSAVERON 240 The number of idle time minutes after which the
screen saver is turned on. Valid values range from
zero (disabled) to 999 minutes (16.65 hours).
SDPCAPNEG 1 Used for securing voice (SRTP) transmissions.
Controls SDP capability negotiation. Interaction
between the SDPCAPNEG and
MEDIAENCRYPTION parameters controls INVITE
behavior.
The valid values are:
● 1 to enable SDP capability negotiation.
● 0 to disable SDP capability negotiation.
SECURECALL 0 Controls the display of a secure call icon on the
user interface. Values are:
0 = The icon is not displayed.
1 = The icon is displayed.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
