Avaya 9608 - Page 83

Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 79
ENABLE_G722 1 Enable or disable G722 capability of the
deskphone. If the parameter is set to 1, the
deskphone includes G722 capability in an
outbound INVITE request, and accepts G722 when
received in an incoming INVITE request. If set to 0,
processing of G722 as a capability is disabled.
Values are 0=Disabled, 1=Enabled.
ENABLE_G726 1 Enable or disable G726 capability of the
deskphone. If the parameter is set to 1, the
deskphone includes G726 capability in an
outbound INVITE request, and accepts G726 when
received in an incoming INVITE request. Values
are 0=disabled, off; 1=enabled, on.
ENABLE_G729 1 Enable or disable G729A codec capability of the
deskphone. Values are:
0=G.729 disabled. If set to 0, processing of G729A
as a capability is disabled.
1 = The deskphone advertises a preference for
"G.729(A) enabled, without Annex B support" in an
outbound INVITE request, and accepts either
G729A or G729A with annex B support [G.729AB]
when received in a 200OK response or an
incoming INVITE request. If set to 1, Incoming
INVITE request: the deskphone accepts either
G729(A) or G729AB.
2 = The deskphone advertises a preference for
"G.729(A) enabled, with Annex B support
[G.729AB]"in an outbound INVITE request, and
accepts either G729A or G729AB when received in
a 200OK response or an incoming INVITE request.
If the parameter is set to 2, Incoming INVITE
request: the deskphone accepts either G729A or
G729AB.
ENABLE_MODIFY_CONTACTS 1 Enable or disable the ability to modify contacts if
the Contact application is enabled. Values are 0=
Disabled; 1= Enabled.
ENABLE_OOD_MSG_TLS_ONL
Y
1 Determines whether a received Out-Of-Dialog
(OOD) REFER must have TLS transport. Values
are: 1 = The ODD REFER must have TLS.
0 = The ODD REFER must have either TCP or
TLS.
Parameter Name Default
Value
Description and Value Range