Avaya 9608 - Page 84

Administering deskphone options
80 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
ENABLE_PHONE_LOCK 0 Enables the local Phone Lock feature. Values are:
0 = Lock Softkey and Feature Button are not
displayed.
1= Lock Softkey and Feature Button are displayed.
If you want to enable this feature for a selected
number of stations in your network, you can do so
by listing those stations under separate groups and
by enabling this feature only for the group, which
you want this feature to be available for.
ENABLE_PRESENCE 1 Enable or disable complete Presence functionality.
If disabled, Presence icons do not show in
Contacts or Call History Lists, Presence is not
displayed to the user, incoming Presence updates
are ignored, and menu items of User Interface to
set Presence options are not displayed (if
available). Values are 0=disabled, off; 1=enabled,
on.
ENABLE_PPM_SOURCED_SIP
PROXYSRVR
1 Enables PPM as a source of SIP proxy server
information. Valid values are:
0 = Do not use PPM as a source for SIP proxy
server information.
1 = Use PPM for SIP proxy server information.
ENABLE_REDIAL 1 Enable or disable complete Redial functionality. If
disabled pressing the redial button has no effect
and the redial softkeys and menu items are not
displayed. Values are 0=disabled; 1=enabled.
ENABLE_REDIAL_LIST 1 Enables or disables the capability to redial out of a
list of recently dialed numbers instead of
performing last number redial. Values are
0=disabled (last number redial only is offered to the
user); 1=enabled (user can select either last
number redial or redial from a list).
ENABLE_REMOVE_PSTN_ACC
ESS_PREFIX
0 Enables the removal of the PSTN access prefix
from collected dial strings when the phone is
communicating with a non-AST controller.Valid
values are:
0 = PSTN access prefix digit is not removed;
1 = PSTN access prefix digit is removed from
collected digit string before formulating the INVITE
for delivery to the controller. (Enabling this
parameter when the deskphone is communicating
with an AST-capable controller has no effect).
Parameter Name Default
Value
Description and Value Range