Administering deskphone options
86 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
HEADSYS 1 Defines the Headset operational mode. Valid
values are:
0 or 2=General Operation, where a disconnect
message returns the deskphone to an idle state.
1 or 3=Call Center Operation, where a disconnect
message does not change the state of the
deskphone.
HOMEIDLETIME 10 Specifies the number of minutes after which the
Home screen will be displayed. The accepted
values are 0 through 30.
HOTLINE " " (Null) Specifies the "hotline" number to dial when the user
goes off-hook.
HTTPDIR " " (Null) HTTP server directory path. The path name
prepended to all file names used in HTTP and
HTTPS get operations during initialization/HTTP
downloads. Value: 0-127 ASCII characters, no
spaces. Null is a valid value. Leading or trailing
slashes are not required. The command syntax is
“GET HTTPDIR myhttpdir” where “myhttpdir” is
your HTTP server path. HTTPDIR is the path for all
HTTP operations.
HTTPEXCEPTION
DOMAINS
" " (Null) Domains to be excluded for SCEP. String
representing zero or one domains in a URL of 0 to
255 characters in dotted decimal or DNS name
format with multiple domains delimited by commas.
HTTPPORT 80 Destination TCP port used for requests to the
HTTP server during initialization. Range is 0 -
65535.
HTTPPROXY " " (Null) Zero or one IP or DNS address of the HTTP server
for SCEP. 0 to 255 characters in dotted decimal or
DNS name format followed by a colon and port
number. The colon and port number are optional. If
this parameter is not null, this (proxy) transport
address is used to set up the HTTP connection as
the transport protocol for SCEP.
HTTPSRVR 0.0.0.0 List of IP Address(es) or DNS Name(s) of HTTP file
server(s) used to download deskphone files. HTTP
server addresses can be in dotted decimal or DNS
format, and must be separated by commas (0-255
ASCII characters, including commas).
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
