Making an outgoing call on a bridged line
About this task
When you make a call on a bridged line, you are using another telephone user’s line. The caller
ID associated with the call you are making may show the call as coming from you or coming
from the person whose line you are using. If you have any questions about how the name or
extension displays to the person you are calling, contact your system administrator.
Procedure
1. Touch the bridged line you want to use.
2. Dial the telephone number, or call the person from the Contacts list, or call the
person from the History list.
Independent alerting for each Bridged Call Appearance
For you to access this feature, your system administrator must first enable this feature for your
extension.
The four options available are the following:
• On: The default ringtone is played when there is a call on the bridged appearance.
• Off: No alert is played.
• Delayed: If the call on the bridged appearance is not answered, an alerting melody is
played after a delay. This delay can be configured by your administrator.
• Abbreviated: There is a single beep to indicate the call on the bridged appearance.
Using bridged call appearances
62 Avaya one-X
™
Deskphone SIP 9621G/9641G user guide for 9600 Series IP deskphones August 2012
Comments? infodev@avaya.com
To Next Page
Loading...
