Avaya B199 - Page 37

Name Description
Date To set the current date.
Note:
You can use this function only through the web interface.
Note:
You can set the current date manually only if NTP is in disabled state.
The date is set in the mm/dd/yyyy format. You can specify the date by doing
the following:
• Manually enter the date in the field by clicking the day, month, and year to
change the value.
• Select a date from the date picker.
Time To set the current time.
Note:
You can use this function only through the web interface.
Note:
You can set the time manually only if NTP is in disabled state.
The time is set in the hh:mm:ss format. You can see the time on the home
screen of the phone.
The interface provides the time using the 12-hour clock approach, that is you
see an AM or PM abbreviation to specify the time.
You can set the time by doing the following:
• Manually enter the time value in the field by clicking the hours, minutes, and
seconds to change the value.
• Select the time from the time picker.
Geo Timezone (auto
DST)
To enable or disable the Daylight Saving Time (DST) mode based on the
selected geographical timezone.
By default, DST is disabled.
Note:
You can use this function only through the web interface.
Table continues…
Configuration of the basic settings
August 2020 Using Avaya Conference Phone B199 37
Comments on this document? infodev@avaya.com