Avaya Converged Platform 130 Series - Chapter 4: Configuration; Dell R640 XL ESXi Configuration; Configuring ESXi Network Settings

Chapter 4: Configuration
Purpose
This chapter provides instructions required after physical installation to complete the system setup
of an Avaya integrated staged server, prior to deploying Avaya Application OVAs. This chapter
also includes instructions to disable TLS 1.0 and 1.1 and to configure SNMP v2 settings for ESXi.
Dell R640 XL ESXi Configuration
Overview
The Avaya Converged Platform130 (ACP 130) is initially supported on Dell R640 servers. This
section provides the instructions required after physical installation to complete the system setup
prior to deploying Avaya Application OVAs.
Required items
• Dell R640 server
• console VGA monitor
• USB keyboard
Configuring ESXi Network Settings
About this task
Use this procedure to configure ESXi Network Settings.
Before you begin
Ensure that you have the following:
• Dell R640 Server
• Console VGA Monitor
• USB Keyboard
October 2019 Installing the Avaya Converged Platform 130 Series 30
Comments on this document? infodev@avaya.com