Checking information about the virtual disk
About this task
Use this procedure to check the basic properties of a specific virtual disk.
Procedure
1. In the Main Menu of Integrated RAID Controller 1: Dell <PERC H730P Mini>
Configuration Utility, click Virtual Disk Management.
The system shows the virtual disks available.
2. Click the virtual disk name.
3. Under Basic Properties, check the information about the virtual disk. You can see the
following parameters of the virtual disk:
• Name
• RAID Level
• Status
• Size
Dell USB R640 RAID Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 75
Comments on this document? infodev@avaya.com
To Next Page
Loading...
