15. SSH is enabled by the Integrator. However, for a new install of ESXi, you must enable this
setting. Highlight Disable SSH. This function is disabled by default; press Enter to change
the state to Enabled. Then press Esc to exit the admin process.
The server is now ready for OVA installation. You may now access the system using the
root login and your customer defined password.
Configuring autostart on ESXi host using Embedded Host Client
About this task
To start VMs automatically when ESXi host starts up, you can use ESXi Embedded Host Client to
configure autostart on the ESXi host.
Procedure
1. Log into the ESXi Embedded Host Client using a web browser.
2. In the Navigator pane on the left, click Manage.
3. On the System tab, click Autostart.
4. Click Edit settings.
Dell R640 XL ESXi Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
