d. (Optional) On the Configuration Management window, if you see the Manage
Foreign Configuration link, then click Manage Foreign Configuration > Clear
Foreign Configuration.
e. Check the Confirm box, select Yes, and click OK.
3. Click Back.
Next steps
Proceed to
Configuring the controller properties on page 69 for the steps to manage the
controller and configure its advance properties.
Configuring the controller properties
About this task
Use this procedure to manage the controller and configure its advance properties.
Before you begin
Delete all existing configurations on the RAID controller.
Dell USB R640 RAID Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 69
Comments on this document? infodev@avaya.com
To Next Page
Loading...
