8. Click Create Virtual Disk.
9. Check the Confirm box, select Yes, and click OK.
The system creates a new virtual disk.
10. Click Back.
Next steps
Proceed to
Checking information about the virtual disk on page 75 for the steps to check the
basic properties of a specific virtual disk.
Virtual disk size
The configuration of the RAID controller is possible only with the specification of the data storage
space available. The following table provides the expected virtual disk sizes for the RAID
configuration.
RAID configuration
Raw Storage
Usable Capacity in
Terabytes
Usable Capacity in
Tebibytes
ACP Base Profile
(no optional HDDs)
5 3x600 GB = 1.8 TB 1.2 1.09 2
6 4x600 GB = 2.4 TB 1.2 1.09 3, 4
6 5x600 GB = 3.0 TB 1.8 1.64
6 6x600 GB = 3.6 TB 2.4 2.18 5
6 7x600 GB = 4.2 TB 3.0 2.73
6 8x600 GB = 4.8 TB 3.6 3.27 51
Note:
The table provides the usable capacity both in Terabytes and Tebibytes, as operating systems
may calculate data storage space in Tebibytes.
Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 74
Comments on this document? infodev@avaya.com
To Next Page
Loading...
