Avaya Converged Platform 130 Series - Performing server recovery or software remastering

If there is a peer certificate and a Master-Key listed, TLS v1.1 is still enabled
Related links
Management of the TLS protocol configuration for vSphere 6.5 U2 Environment on page 52
Performing server recovery or software remastering
About this task
In the event of server failure, you should take necessary steps to recover the server data. You may
also need to replace or remaster the system software on Avaya Converged Platform 130
Appliance.
Before you begin
Ensure that you have the following:
• Console VGA monitor
• USB Keyboard
• Appropriate ESXi software downloaded from PLDS. See PSN027079u- Avaya Converged
Platform 130 Dell
®
R640 Customized Image of VMware ESXi 6.5 U2.
• Latest Avaya certified BIOS/FW update for ACP 130. See PSN027078u- Avaya Converged
Platform 130 Dell
®
R640 Avaya Certified BIOS/FW Update.
If you are replacing the server, first attempt to import the drives from the failed server. For more
information, see
Replacing the host server on page 64 and Dell
®
R640 FRU Replacement
Process.
Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 58
Comments on this document? infodev@avaya.com